3.0.13 netgear router setup

3.0.13 netgear router setup


Default ip address 192.168.1.1 or 192.168.0.1

default username : admin

default password : password

To install your NETGEAR router using the router web interface:

  1. Using an Ethernet cable, connect your modem to the yellow Internet port on the back of your NETGEAR router.

  1. Connect your computer to one of the Ethernet ports on your router.

  1. Press the Power button on the router.
    The LEDs on the router light.

  1. Open a web browser and enter routerlogin.net.
    You are prompted to log in.
    Note: If you experience any Internet connection issues, try power-cycling your network.

  1. Log in to the router.
    The default user name is admin. The default password is password.
    The user name and password are case-sensitive.

  1. Click ADVANCED > Setup Wizard.

  1. Select the Yes radio button and click Next.
    The router detects your Internet connection.
    You are prompted to log in.

  1. Enter and confirm a new admin password.

  1. Select and answer two security questions.

  1. Click Next.
    The Congratulations! page displays.

 

  1. Click Next.
    The Firmware Update Assistant page displays.

  1. If a firmware update is not available, click OK.
    Your router is set up.

  1. If a firmware update is available, click Yes to update your firmware.
    The firmware updates.
    The router reboots.
    You are prompted to log in.

  1. Enter admin and the new password you created earlier.
    The BASIC page displays.

 

 

Note : This setup applies to the following routers.

  • Wireless AX Router Nighthawk (WiFi 6) (39)

  • Wireless AC Router Nighthawk (16)

  • Wireless AC Router (11)

  • Wireless N Router (62)

  • Legacy Wireless N Router (1)

  • Wireless BE Router Nighthawk (WiFi 7) (2)

  • Wireless AX Router Nighthawk (WiFi 6E) (4)

 


    • Related Articles

    • 3.0.11 Router Setup guide

      Router Setup guide Asus router setup guide Billion router setup guide FRITZ!Box router setup Huawei router setup Netcomm router setup Technicolor router setup TP-Link router setup D-link router setup netgear router setup belong and sagecomm router ...

    • 3.0.18 Huawei router setup

      1. Setup preparation: Connect an Ethernet cable from the WAN port of your router to a LAN port on the Internet source (such as a broadband modem or fiber-optic modem). Next, connect your computer to your router's default Wi-Fi network (check the ...

    • 3.0.16 Technicolor router setup

      1. To access modem gateway, enter 192.168.1.1 in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address 2. Log in with the account you set for the modem router, otherwise check the ...

    • 3.0.17 Netcomm router setup

      Depending on your NBN connection type, connect one of the following: · If there is no NBN Connection Box installed, connect the DSL port at the back of your modem to the phone wall socket using a phone cable. · If there is an NBN Connection Box ...

    • 3.0.21 Asus router setup guide

      The device is wireless connect to the router. · Check if all the devices (Modem and router) are all connected via RJ-45 cable. · Connect the RJ45 cable to WAN port of router. · Insert your wireless router’s AC adapter to the DC-IN port and plug it to ...