3.0.16 Technicolor router setup

3.0.16 Technicolor router setup

1.       To access modem gateway, enter 192.168.1.1 in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address


2.       Log in with the account you set for the modem router, otherwise check the default username and password on the sticker of your modem

 

3.       The TG-789 Gateway web interface appears and automatically starts the Setup Wizard and asks you to configure your Internet connection

 

a.       In the WAN Type list, select PPP over Ethernet

b.      Enter the username and password provided to you via email when the order was completed. Hit Next to continue

c.       Register your VoIP if any, then personalize the WiFi credentials and click on Next until it reaches the Summary page


Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.


    • Related Articles

    • 3.0.11 Router Setup guide

      Router Setup guide Asus router setup guide Billion router setup guide FRITZ!Box router setup Huawei router setup Netcomm router setup Technicolor router setup TP-Link router setup D-link router setup netgear router setup belong and sagecomm router ...

    • 3.0.13 netgear router setup

      Default ip address 192.168.1.1 or 192.168.0.1 default username : admin default password : password To install your NETGEAR router using the router web interface: Using an Ethernet cable, connect your modem to the yellow Internet port on the back of ...

    • 3.0.18 Huawei router setup

      1. Setup preparation: Connect an Ethernet cable from the WAN port of your router to a LAN port on the Internet source (such as a broadband modem or fiber-optic modem). Next, connect your computer to your router's default Wi-Fi network (check the ...

    • 3.0.17 Netcomm router setup

      Depending on your NBN connection type, connect one of the following: · If there is no NBN Connection Box installed, connect the DSL port at the back of your modem to the phone wall socket using a phone cable. · If there is an NBN Connection Box ...

    • 3.0.21 Asus router setup guide

      The device is wireless connect to the router. · Check if all the devices (Modem and router) are all connected via RJ-45 cable. · Connect the RJ45 cable to WAN port of router. · Insert your wireless router’s AC adapter to the DC-IN port and plug it to ...