3.0.20 Billion router setup guide
Step 1 : To access modem gateway, enter http://192.168.1.254 in the address bar of a web browser. If the IP
address does not work or if it has been changed, check your router's IP
address.
Enter admin for both the username and password and click OK to login.
If you have changed the login credentials, please enter the current username and password for your modem interface.
Go to Quick
Start and select Ethernet, press Continue to go on to next step.
Step 2 : The WAN Type should be PPPoE.
Enter the username and password provided to you via email. Hit Continue
Step 3 : Wait while the device is configured. After the configuration is successful, click Next to Wireless button and you may proceed to configure the Wireless setting.
Step 4 : The device supports dual-band wireless connections. Set up your 5GHz and 2.4GHz SSID and password and tick Enable to enable the connection.
A Success page will show up once done and you're all set!
Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.
Related Articles
3.0.11 Router Setup guide
Router Setup guide Asus router setup guide Billion router setup guide FRITZ!Box router setup Huawei router setup Netcomm router setup Technicolor router setup TP-Link router setup D-link router setup netgear router setup belong and sagecomm router ...3.0.21 Asus router setup guide
The device is wireless connect to the router. · Check if all the devices (Modem and router) are all connected via RJ-45 cable. · Connect the RJ45 cable to WAN port of router. · Insert your wireless router’s AC adapter to the DC-IN port and plug it to ...3.0.13 netgear router setup
Default ip address 192.168.1.1 or 192.168.0.1 default username : admin default password : password To install your NETGEAR router using the router web interface: Using an Ethernet cable, connect your modem to the yellow Internet port on the back of ...3.0.18 Huawei router setup
1. Setup preparation: Connect an Ethernet cable from the WAN port of your router to a LAN port on the Internet source (such as a broadband modem or fiber-optic modem). Next, connect your computer to your router's default Wi-Fi network (check the ...3.0.16 Technicolor router setup
1. To access modem gateway, enter 192.168.1.1 in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address 2. Log in with the account you set for the modem router, otherwise check the ...