1.05-8 -D-link router setup

1.05-8 -D-link router setup

D-link routers

  1. Once connected, on your PC, open a web browser.

  1. In the address bar of the web browser, type 192.168.0.1 or 192.168.1.1 and press Enter. Alternatively, you can also type the following links instead of the default gateway address; http://dlinkrouter or http://dlinkrouter.local

  1. You will be taken to the login page of your D-Link Router and to continue, you will have to enter the login username and password.

  1. By default, the username is admin and a password is not required. If you have not changed the admin login username and password then you can log in using the default credentials. You can find the default login credentials of your router on a label at the side or back of your router. You can also search on the internet for the default login credentials of your router model.

  1. Enter the login credentials and log in to your D-Link Router.

       6. Once you are logged in, Click Setup wizard

    7. Change the default password of the device (you may opt not to change the password by clicking skip)


 

 

 8. Select the appropriate Country and ISP

  1. Setup your desired Wireless name and password

 

 

NOTE : for video reference click here

 

10. Click apply and you are finished setting up the router

 

 

 

 

 


    • Related Articles

    • 3.0.11 Router Setup guide

      Router Setup guide Asus router setup guide Billion router setup guide FRITZ!Box router setup Huawei router setup Netcomm router setup Technicolor router setup TP-Link router setup D-link router setup netgear router setup belong and sagecomm router ...

    • 3.0.15 TP-Link router setup

      TP-Link ax1500 wi-fi 6 setup Open your web browser (e.g. Chrome, Firefox, Opera or any other browser) login to your router (default ip address 192.168.0.1) You should see 2 text fields where you can enter a username and a password. Note : Check the ...

    • 3.0.13 netgear router setup

      Default ip address 192.168.1.1 or 192.168.0.1 default username : admin default password : password To install your NETGEAR router using the router web interface: Using an Ethernet cable, connect your modem to the yellow Internet port on the back of ...

    • 3.0.18 Huawei router setup

      1. Setup preparation: Connect an Ethernet cable from the WAN port of your router to a LAN port on the Internet source (such as a broadband modem or fiber-optic modem). Next, connect your computer to your router's default Wi-Fi network (check the ...

    • 3.0.16 Technicolor router setup

      1. To access modem gateway, enter 192.168.1.1 in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address 2. Log in with the account you set for the modem router, otherwise check the ...