1.0.14 Modem and Computer not communicating

1.0.14 Modem and Computer not communicating

 Modem and Computer not communicating

  1. Confirm your device is connected to your modem, otherwise it will not be able to access the modem's default gateway.
    Note: WiFi devices connected via     WPS or Guest WiFi (an optional feature in some modems) are not able to access the modem's default gateway. You must connect using the WiFi password.
  2. Turn off both your device and your modem and leave them off for at least 60 seconds.
  3. Turn your device and modem back on and allow them both to reboot.
  4. Try to browse to your modem’s default gateway.
  5. If possible, attempt to browse to your modem’s default gateway on a device connected to your modem via Ethernet, instead of WiFi.
  6. If devices can access your modem's default gateway via Ethernet but not WiFi, please troubleshoot your WiFi.
  7. If possible, attempt to browse to your modem’s default gateway on a different device connected to your modem via Ethernet or WiFi.
  8. If some devices can access your modem's default gateway but others can't, the devices that can't may be faulty. If you suspect this is the case, you may need to make a claim for a replacement under warranty or if the warranty has expired, investigate the possibility of getting it repaired.
  9. Windows users only: performing a winsock reset may resolve an issue with a wireless adapter.
  10. Contact us for further assistance.


    • Related Articles

    • 3.0.22 Browsing to the Default Gateway for your Modem

      Browsing to the Default Gateway for your Modem Logging in to your modem's default gateway will allow you to view and edit the modem settings. You may need to do this while configuring your modem or customizing your WiFi network name or password. ...

    • 3.0.2 Nokia FastMile 5G Modem

      Nokia FastMile 5G Modem Follow the instructions below to set up your Nokia FastMile for 5G Home Broadband. First, ensure you have: A message from us advising you to plug in your modem. An available electrical outlet. Unplugged your old broadband ...

    • 3.0.18 Huawei router setup

      1. Setup preparation: Connect an Ethernet cable from the WAN port of your router to a LAN port on the Internet source (such as a broadband modem or fiber-optic modem). Next, connect your computer to your router's default Wi-Fi network (check the ...

    • 3.0.21 Asus router setup guide

      The device is wireless connect to the router. · Check if all the devices (Modem and router) are all connected via RJ-45 cable. · Connect the RJ45 cable to WAN port of router. · Insert your wireless router’s AC adapter to the DC-IN port and plug it to ...

    • 3.0.13 netgear router setup

      Default ip address 192.168.1.1 or 192.168.0.1 default username : admin default password : password To install your NETGEAR router using the router web interface: Using an Ethernet cable, connect your modem to the yellow Internet port on the back of ...